Update Linux Guide.md

docs/guides/Linux Guide.md

@@ -1,38 +1,62 @@
-#Setting up NadekoBot on Linux
+##Setting up NadekoBot on Linux
 
 ####Setting up NadekoBot on Linux Digital Ocean Droplet
-######If you want Nadeko to play music for you 24/7 without having to hosting it on your PC and want to keep it cheap, reliable and convenient as possible, you can try Nadeko on Linux Digital Ocean Droplet using the link [DigitalOcean][DigitalOcean] (and using this link will be supporting Nadeko and will give you **$10 credit**)
+If you want Nadeko to play music for you 24/7 without having to hosting it on your PC and want to keep it cheap, reliable and convenient as possible, you can try Nadeko on Linux Digital Ocean Droplet using the link [DigitalOcean][DigitalOcean] (and using this link will be supporting Nadeko and will give you **$10 credit**)
 
-######Keep this helpful video handy [Linux Setup Video][Linux Setup Video] (thanks to klincheR) it contains how to set up the Digital Ocean droplet aswell and follow this [Guide](DigitalOcean Guide.md)
+Keep this helpful video handy [Linux Setup Video][Linux Setup Video] (thanks to klincheR) it contains how to set up the Digital Ocean droplet aswell.
 
 ####Setting up NadekoBot
+Assuming you have followed the link above to created an account in Digital Ocean and video to set up the bot until you get the `IP address and root password (in email)` to login, its time to begin.
 
-Note: When you install mono, please run update once more to check for any missing repos and dependencies.
+#### Prerequisites
+- Download [PuTTY][PuTTY]
+- Download [CyberDuck][CyberDuck]
+
+#### Follow these steps
+
+- **Open PuTTY.exe** that you downloaded before, and paste or enter your `IP address` and then click **Open**.
+If you entered your Droplets IP address correctly, it should show **login as:** in a newly opened window.
+- Now for **login as:**, type `root` and hit enter.
+- It should then, ask for password, type the `root password` you have received in your **email address registered with Digital Ocean**, then hit Enter.
+
+*(as you are running it for the first time, it will most likely to ask you to change your root password, for that, type the "password you received through email", hit Enter, enter a "new password", hit Enter and confirm that "new password" again.*
+**SAVE that new password somewhere safe not just in mind**. After you done that, you are ready to write commands.
+
+**Copy and just paste** using **mouse right-click** (it should paste automatically)
 
 ####Installing Mono
-######MONO (Source: [Mono Source][Mono Source])
+MONO (Source: [Mono Source][Mono Source])
+
+**1)**
 
 `sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF`
+
 `echo "deb http://download.mono-project.com/repo/debian wheezy main" | sudo tee /etc/apt/sources.list.d/mono-xamarin.list`
+
 `sudo apt-get update`
 
 Note if the command is not being initiated, hit **Enter**
 
-`echo "deb http://download.mono-project.com/repo/debian wheezy-apache24-compat main" | 
+**2)**
-sudo tee -a /etc/apt/sources.list.d/mono-xamarin.list`
+
+`echo "deb http://download.mono-project.com/repo/debian wheezy-apache24-compat main" | sudo tee -a /etc/apt/sources.list.d/mono-xamarin.list`
 
 ####Mono on Debian 8 and later
+**2.5)**
 
-`echo "deb http://download.mono-project.com/repo/debian wheezy-libjpeg62-compat main" | 
+`echo "deb http://download.mono-project.com/repo/debian wheezy-libjpeg62-compat main" | sudo tee -a /etc/apt/sources.list.d/mono-xamarin.list`
-sudo tee -a /etc/apt/sources.list.d/mono-xamarin.list`
 
 ####Mono on CentOS 7, Fedora 19 (and later) and later
+**2.6)**
 
 `yum install yum-util`
+
 `rpm --import "http://keyserver.ubuntu.com/pks/lookup?op=get&search=0x3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF"`
+
 `yum-config-manager --add-repo http://download.mono-project.com/repo/centos/`
 
 ####Mono Devel
+**3)**
 
 `apt-get install mono-devel`
 
@@ -42,22 +66,26 @@ sudo tee -a /etc/apt/sources.list.d/mono-xamarin.list`
 **In case you are having issues with Mono where you get a random string and the bot won't run, do this:**
 
 `sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF`
+
 `echo "deb http://download.mono-project.com/repo/debian wheezy main" | sudo tee /etc/apt/sources.list.d/mono-xamarin.list`
+
 `apt-get install ca-certificates-mono`
+
 `mozroots --import --sync`
 
 ####Installing Opus Voice Codec
-
+**4)**Opus Voice Codec
-- Opus Voice Codec
 
 `sudo apt-get install libopus0 opus-tools`
 
 **Type** `y` **hit Enter**
 
+**5)**
 `sudo apt-get install libopus-dev`
 
 ####FFMPEG
 
+**6)**
 `apt-get install ffmpeg`
 
 **Type** `y` **hit Enter**
@@ -67,7 +95,9 @@ NOTE: if its "not installing" then, follow the guide here: [FFMPEG Help Guide][F
 **All you need to do, if you are running UBUNTU 14.04 is initiate these:**
 
 `sudo add-apt-repository ppa:mc3man/trusty-media`
+
 `sudo apt-get update`
+
 `sudo apt-get dist-upgrade`
 
 *Before executing* `sudo apt-get install ffmpeg`
@@ -79,48 +109,62 @@ NOTE: if its "not installing" then, follow the guide here: [FFMPEG Help Guide][F
 In case you are not able to install it with installer ^up there, follow these steps:
 
 `sudo apt-get update`
+
 `echo "deb http://ftp.debian.org/debian jessie-backports main" | tee /etc/apt/sources.list.d/debian-backports.list`
+
 `sudo apt-get update`
+
 `sudo  apt-get install ffmpeg -y`
 
 ####Uncomplicated Firewall UFW
 
-- Install UFW
+**7)**
 `apt-get install ufw`
 
 **it is most likely to have it already installed so if you see it is already installed, check with following command, and/or enable it**
 
+**8)**
 `ufw status`
+
+**9)**
 `ufw enable`
 
 **Type** `y` **hit Enter**
 
+**10)**
 `sudo ufw allow ssh`
 
 ####Installing Unzip
+**11)**
+Unzip
 
 `apt-get install unzip`
 
 ####Installing TMUX
+**12)**
+TMUX
 
 `apt-get install tmux`
 
 **Type** `y` **hit Enter**
 
-####Importing certs
+####Importing Discord certs
-
+**13)**
 `certmgr -ssl https://discordapp.com`
 
+**14)**
 `certmgr -ssl https://gateway.discord.gg`
 
 Type `yes` and hit Enter **(three times - as it will ask for three times)**
 
 ####Creating Nadeko folder
-- Create a new folder “nadeko” or anything you prefer
+**15)**
+Create a new folder “nadeko” or anything you prefer
 
 `mkdir nadeko`
 
-- Move to “nadeko” folder (note `cd --` to go back the directory)
+**16)**
+Move to “nadeko” folder (note `cd --` to go back the directory)
 
 `cd nadeko`
 
@@ -129,12 +173,15 @@ Type `yes` and hit Enter **(three times - as it will ask for three times)**
 Go to this link: [Releases][Releases] and **copy the zip file address** of the lalest version available,
 it should look like `https://github.com/Kwoth/NadekoBot/releases/download/vx.xx/NadekoBot.vx.x.zip`
 
+**17)**
 Get the correct link, type `wget`, then *paste the link*, then hit **Enter**.
 
 `wget https://github.com/Kwoth/NadekoBot/releases/download/vx.xx/NadekoBot.vx.x.zip`
 
 **^Do not copy-paste it**
 
+**18)**
+
 Now we need to `unzip` the downloaded zip file and to do that, type the file name as it showed in your screen or just copy from the screen, should be like ` NadekoBot.vx.x.zip`
 
 `unzip NadekoBot.vx.x.zip`
@@ -159,24 +206,24 @@ Now we need to `unzip` the downloaded zip file and to do that, type the file nam
 - Copy the `credentials_example.json` to desktop
 - EDIT it as it is guided here: [Setting up Credentials.json](Windows Guide.md#setting-up-credentialsjson-file)
 - Read here how to [Create DiscordBot application](https://github.com/miraai/NadekoBot/blob/dev/docs/guides/Windows%20Guide.md#creating-discordbot-application)
-- Rename it to `credentials.json` and paste/put it back in the folder.
+- Rename it to `credentials.json` and paste/put it back in the folder. `(Yes, using CyberDuck)`
 - You should see two files `credentials_example.json` and `credentials.json`
-- Also if you already have nadeko setup and have `credentials.json`, `config.json`, `nadekobot.sqlite`, and `"permissions" folder`, you can just copy and paste it to folder.
+- Also if you already have nadeko setup and have `credentials.json`, `config.json`, `nadekobot.sqlite`, and `"permissions" folder`, you can just copy and paste it to the Droplets folder using CyberDuck.
 
 ####Running NadekoBot
 
-- Type/ Copy and hit **Enter**.
+Go back to **PuTTY**, `(hope its still running xD)`
+
+**19)**
+Type/ Copy and hit **Enter**.
 
 `tmux new -s nadeko`
 
-**^this will create a new session named “nadeko”** `(you can replace “nadeko” with anything you prefer and remember 
+**^this will create a new session named “nadeko”** `(you can replace “nadeko” with anything you prefer and remember its your session name) so you can run the bot in background without having to keep running PuTTY in the background.`
-its your session name) so you can run the bot in background.`
-- Enter your Nadeko folder 
 
 `cd nadeko`
 
-- Start NadekoBot with mono
+**20)**
-
 `mono NadekoBot.exe`
 
 **CHECK THE BOT IN DISCORD, IF EVERYTHING IS WORKING**
@@ -184,7 +231,6 @@ its your session name) so you can run the bot in background.`
 Now time to **move bot to background** and to do that, press **CTRL+B+D** (this will ditach the nadeko session using TMUX), and you can finally close PuTTY now.
 
 Copy your CLIENT ID (that's in the same Developer page where you brought your token) and replace `12345678` in this link: `https://discordapp.com/oauth2/authorize?client_id=12345678&scope=bot&permissions=66186303` with it. Go to that link and you will be able to add your bot to your server.
-Or check this guide also [Inviting your bot to your server](Windows Guide.md#inviting-your-bot-to-your-server)
 
 **NOW YOU HAVE YOUR OWN NADEKO BOT** `Thanks to Kwoth <3`
 
@@ -194,14 +240,29 @@ Or check this guide also [Inviting your bot to your server](Windows Guide.md#inv
 -If you want to **switch to/ see that session**, type `tmux a -t nadeko` (**nadeko** is the name of the session we created before so, replace **“nadeko”** with the session name you created.)
 -If you want to **kill** NadekoBot **session**, type `tmux kill-session -t nadeko`
 
+####Restarting Nadeko with the Server
+Open **PuTTY** and login as you have before, type `reboot` and hit Enter.
+
 ####Updating Nadeko
 
-**If you want to update your NadekoBot** just follow the steps from [Getting NadekoBot](https://github.com/miraai/NadekoBot/blob/dev/docs/guides/Linux%20Guide.md#creating-nadeko-folder)
+**FOLLOW THESE STEPS SERIALLY**
+
+- **-21 OR 22**
+- **-19**
+- **-16**
+- **-17**
+- **-18**
+- **-20**
+
+HIT **CTRL+B+D** and close **PuTTY**
 
 `IF YOU FACE ANY TROUBLE ANYWHERE IN THE GUIDE JUST FIND US IN NADEKO'S DISCORD SERVER`
 
+[PuTTY]: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
+[CyberDuck]: https://cyberduck.io
 [Linux Setup Video]: https://www.youtube.com/watch?v=icV4_WPqPQk&feature=youtu.be
 [Releases]: https://github.com/Kwoth/NadekoBot/releases
+[Readme]: https://github.com/Kwoth/NadekoBot/blob/master/README.md
 [FFMPEG Help Guide]: http://www.faqforge.com/linux/how-to-install-ffmpeg-on-ubuntu-14-04/
 [Mono Source]: http://www.mono-project.com/docs/getting-started/install/linux/
 [DigitalOcean]: http://m.do.co/c/46b4d3d44795/