Merge remote-tracking branch 'upstream/dev' into dev

docs/guides/Linux Guide.md

@@ -92,9 +92,19 @@ sudo apt-get update && sudo apt-get install ffmpeg -y
 
 ####Getting NadekoBot
 
-![img6](https://cdn.discordapp.com/attachments/251504306010849280/251505587089571850/getting_nadeko.gif)
+Use the following command to get and run `linuxAIO.sh`:		
+(Remember **DO NOT** rename the file `linuxAIO.sh`)
 
-`cd ~ && curl -L https://github.com/Kwoth/NadekoBot-BashScript/raw/master/nadeko_installer.sh | sh`
+`cd ~ && wget https://github.com/Kwoth/NadekoBot-BashScript/raw/master/linuxAIO.sh && bash linuxAIO.sh`
+
+Follow the on screen instructions:
+
+1. To Get the latest build. (most recent updates)
+2. To Get the stable build.
+
+Choose either `1` or `2` then press `enter` key.	
+Once Installation is completed you should see the options again.	
+Next, choose `5` to exit. 
 
 ####Creating and Inviting bot
 
@@ -141,8 +151,8 @@ sudo apt-get update && sudo apt-get install ffmpeg -y
 - Copy the `credentials.json` to desktop
 - EDIT it as it is guided here: [Setting up credentials.json](http://nadekobot.readthedocs.io/en/1.0/guides/Windows%20Guide/#setting-up-credentialsjson-file)
 - Paste/put it back in the folder once done. `(Using CyberDuck/WinSCP)`
-- If you already have Nadeko 1.0 setup and have `credentials.json` and `NadekoBot.db`, you can just copy and paste the `credentials.json` to `NadekoBot/src/NadekoBot` and `NadekoBot.db` to `NadekoBot/src/NadekoBot/bin/Release/netcoreapp1.0/data` using CyberDuck.
+- **If** you already have Nadeko 1.0 setup and have `credentials.json` and `NadekoBot.db`, you can just copy and paste the `credentials.json` to `NadekoBot/src/NadekoBot` and `NadekoBot.db` to `NadekoBot/src/NadekoBot/bin/Release/netcoreapp1.0/data` using CyberDuck.
-- If you have Nadeko 0.9x follow the [Upgrading Guide](http://nadekobot.readthedocs.io/en/1.0/guides/Upgrading%20Guide/)
+- **If** you have Nadeko 0.9x follow the [Upgrading Guide](http://nadekobot.readthedocs.io/en/1.0/guides/Upgrading%20Guide/)
 
 ####Setting up Music
 
@@ -152,32 +162,33 @@ Once done, go back to **PuTTY**
 
 ####Running NadekoBot
 
-![img8](https://cdn.discordapp.com/attachments/251504306010849280/251506149973557259/running_nadeko.gif)
-
 **Create a new Session:**
 
 - `tmux new -s nadeko`  
   
-That command will create a new session named **nadeko** *(you can replace “nadeko” with anything you prefer and remember its your session name)* so you can run the bot in background without having to keep running the PuTTY.
+The above command will create a new session named **nadeko** *(you can replace “nadeko” with anything you prefer and remember its your session name)* so you can run the bot in background without having to keep the PuTTY running.
 
-- `cd NadekoBot/src/NadekoBot/`
+**Next, we need to run `linuxAIO.sh` in order to get the latest running scripts with patches:**
 
-**Without Auto Restart:**
+- `cd ~ && bash linuxAIO.sh`
 
-- `dotnet run --configuration Release`
+From the options,
 
-**With Auto Restart:**
+Choose `3` To Run the bot normally.		
+**NOTE:** With option `3` (Running Normally), if you use `.die` [command](http://nadekobot.readthedocs.io/en/1.0/Commands%20List/#administration) in discord. The bot will shut down and will stay offline until you manually run it again. (best if you want to check the bot.)
 
-- `while :; do dotnet run -c Release; sleep 5s; done`
+Choose `4` To Run the bot with Auto Restart.	
+**NOTE:** With option `4` (Running with Auto Restart), bot will auto run if you use `.die` [command](http://nadekobot.readthedocs.io/en/1.0/Commands%20List/#administration) making the command `.die` to function as restart.	
 
-**NOTE:** With Auto Restart, bot will auto run if you use `.die` [command](http://nadekobot.readthedocs.io/en/1.0/Commands%20List/#administration) so you do not have to manual restart if you ever want to. 
+See how that happens:
-See how that happens below:
 
 ![img9](https://cdn.discordapp.com/attachments/251504306010849280/251506312893038592/die_explaination.gif)
 
+**Remember** that, while running with Auto Restart, you will need to [close the tmux session](http://nadekobot.readthedocs.io/en/1.0/guides/Linux%20Guide/#restarting-nadeko) to stop the bot completely.
+
 **Now check your Discord, the bot should be online**
 
-Now time to **move the bot to background** and to do that, press **CTRL+B+D** (this will detach the nadeko session using TMUX), and you can finally close PuTTY now.
+Next to **move the bot to background** and to do that, press **CTRL+B+D** (this will detach the nadeko session using TMUX), and you can finally close PuTTY now.
 
 ####Some more Info (just in case)
 
@@ -205,25 +216,36 @@ Open **PuTTY** and login as you have before, type `reboot` and hit Enter.
 
 - Kill your previous session, check with `tmux ls`
 - `tmux kill-session -t nadeko` (don't forget to replace "nadeko" to what ever you named your bot's session)
-- Follow: [Running NadekoBot](http://nadekobot.readthedocs.io/en/1.0/guides/Linux%20Guide/#running-nadekobot)
+- [Run the bot again.](http://nadekobot.readthedocs.io/en/1.0/guides/Linux%20Guide/#running-nadekobot)
 
 ####Updating Nadeko
 
-- Connect to the terminal
+- Connect to the terminal through PuTTY.
+- `tmux kill-session -t nadeko` (don't forget to replace **nadeko** in the command with the name of your bot's session)
 - Make sure the bot is **not** running.
-- `cd ~ && curl -L https://github.com/Kwoth/NadekoBot-BashScript/raw/master/nadeko_installer.sh | sh` (The same command used to install earlier)
+- `tmux new -s nadeko` (**nadeko** is the name of the session)
-- Run the bot again as normal.
+- `cd ~ && bash linuxAIO.sh`
+- Choose either `1` or `2` to update the bot with **latest build** or **stable build** respectively.
+- Choose either `3` or `4` to run the bot again with **normally** or **auto restart** respectively.
+- Done. You can close PuTTY now.
 
 ####Alternative way to Install
 
-- If the [Nadeko installer](http://nadekobot.readthedocs.io/en/1.0/guides/Linux%20Guide/#getting-nadekobot) shows errors, try manually installing with the following steps:
+If the [Nadeko installer](http://nadekobot.readthedocs.io/en/1.0/guides/Linux%20Guide/#getting-nadekobot) shows any kind error, check if you have the `linuxAIO.sh` file and make sure its not renamed or if you want to manually install the bot. Use the following command(s):
+
+
+![img6](https://cdn.discordapp.com/attachments/251504306010849280/251505587089571850/getting_nadeko.gif)
+
+`cd ~ && curl -L https://github.com/Kwoth/NadekoBot-BashScript/raw/master/nadeko_installer.sh | sh`
+
+**OR**
 
 ```
 cd ~ && git clone -b 1.0 --recursive --depth 1 https://github.com/Kwoth/NadekoBot.git
 cd ~/NadekoBot/discord.net/src/Discord.Net && dotnet restore && cd ../Discord.Net.Commands && dotnet restore && cd ../../../src/NadekoBot/ && dotnet restore && dotnet build --configuration Release
 ```
   
-- If you are still getting errors using the above steps:
+If you are getting error using the above steps try:
 
 ```
 cd ~/NadekoBot/discord.net && dotnet restore -s https://dotnet.myget.org/F/dotnet-core/api/v3/index.json && dotnet restore

docs/guides/OSX Guide.md

@@ -1,4 +1,5 @@
-### Setting Up NadekoBot on OSX
+## Setting Up NadekoBot on OSX
+
 #### Prerequisites 
 - [Homebrew][Homebrew]
 - Google Account
@@ -54,10 +55,19 @@ A dialog box will open asking if you want to install `xcode-select`. Select inst
 
 ####Downloading and building Nadeko
 
-**METHOD I**
+Use the following command to get and run `linuxAIO.sh`:		
+(Remember **DO NOT** rename the file `linuxAIO.sh`)
 
-- `cd ~`
+`cd ~ && wget https://github.com/Kwoth/NadekoBot-BashScript/raw/master/linuxAIO.sh && bash linuxAIO.sh`
-- `curl -L https://github.com/Kwoth/NadekoBot-BashScript/raw/master/nadeko_installer.sh | sh`
+
+Follow the on screen instructions:
+
+1. To Get the latest build. (most recent updates)
+2. To Get the stable build.
+
+Choose either `1` or `2` then press `enter` key.	
+Once Installation is completed you should see the options again.	
+Next, choose `5` to exit. 
 
 ####Creating DiscordBot application
 - Go to [the Discord developer application page.][DiscordApp]
@@ -101,15 +111,21 @@ A dialog box will open asking if you want to install `xcode-select`. Select inst
 
 - Start Nadeko using .NET Core:
 
-`cd ~/NadekoBot/src/NadekoBot/`
+`cd ~ && bash linuxAIO.sh`
 
-`dotnet run --configuration Release`
+From the options,
 
-CHECK THE BOT IN DISCORD, IF EVERYTHING IS WORKING
+Choose `3` To Run the bot normally.		
+**NOTE:** With option `3` (Running Normally), if you use `.die` [command](http://nadekobot.readthedocs.io/en/1.0/Commands%20List/#administration) in discord. The bot will shut down and will stay offline untill you manually run it again. (best if you want to check the bot.)
 
-Now time to move bot to background and to do that, press CTRL+B+D (this will detach the nadeko session using TMUX)
+Choose `4` To Run the bot with Auto Restart.	
+**NOTE:** With option `4` (Running with Auto Restart), bot will auto run if you use `.die` [command](http://nadekobot.readthedocs.io/en/1.0/Commands%20List/#administration) making the command `.die` to be used as restart.	
+**NOTE:** [To stop the bot you will have to kill the session.](http://nadekobot.readthedocs.io/en/1.0/guides/OSX%20Guide/#some-more-info)
 
-*If you used Screen press CTRL+A+D (this will detach the nadeko screen)*
+**Now check your Discord, the bot should be online**
+
+Now time to move bot to background and to do that, press CTRL+B+D (this will detach the nadeko session using TMUX)	
+If you used Screen press CTRL+A+D (this will detach the nadeko screen)
 
 ####Inviting your bot to your server 
 - [Invite Guide](http://discord.kongslien.net/guide.html)
@@ -125,24 +141,14 @@ For Music Setup and API keys check [Setting up NadekoBot for Music](http://nadek
 
 ####Updating Nadeko
 
-Nadeko is really easy to update as of version 1.0! just copy and paste the command below to update Nadeko to the latest version
+- Connect to the terminal.
-
+- `tmux kill-session -t nadeko` [(don't forget to replace **nadeko** in the command to what ever you named your bot's session)](http://nadekobot.readthedocs.io/en/1.0/guides/OSX%20Guide/#some-more-info)
-`cd ~/NadekoBot/ && git init && git pull`
+- Make sure the bot is **not** running.
-
+- `tmux new -s nadeko` (**nadeko** is the name of the session)
-####Alternative Method to Install Nadeko
+- `cd ~ && bash linuxAIO.sh`
-
+- Choose either `1` or `2` to update the bot with **latest build** or **stable build** respectively.
-*If you fail to install the bot using [METHOD I](http://nadekobot.readthedocs.io/en/1.0/guides/OSX%20Guide/#downloading-and-building-nadeko) try:*
+- Choose either `3` or `4` to run the bot again with **normally** or **auto restart** respectively.
-
+- Done. You can close terminal now.
-**METHOD II**
-
-- `cd ~`
-- `git clone -b 1.0 --recursive https://github.com/Kwoth/NadekoBot.git`
-- `cd ~/NadekoBot/discord.net`
-- `dotnet restore -s https://dotnet.myget.org/F/dotnet-core/api/v3/index.json`
-- `dotnet restore`
-- `cd ~/NadekoBot/src/NadekoBot/`
-- `dotnet restore` 
-- `dotnet build --configuration Release`
 
 ####Some more Info
 
@@ -158,6 +164,23 @@ Nadeko is really easy to update as of version 1.0! just copy and paste the comma
 - If you want to switch to/ see that screen, type `screen -r nadeko` (nadeko is the name of the screen we created before so, replace `nadeko` with the screen name you created.)
 - If you want to kill the NadekoBot screen, type `screen -X -S nadeko quit`
 
+####Alternative Method to Install Nadeko
+
+**METHOD I**
+
+- `cd ~ && curl -L https://github.com/Kwoth/NadekoBot-BashScript/raw/master/nadeko_installer.sh | sh`
+
+**METHOD II**
+
+- `cd ~`
+- `git clone -b 1.0 --recursive https://github.com/Kwoth/NadekoBot.git`
+- `cd ~/NadekoBot/discord.net`
+- `dotnet restore -s https://dotnet.myget.org/F/dotnet-core/api/v3/index.json`
+- `dotnet restore`
+- `cd ~/NadekoBot/src/NadekoBot/`
+- `dotnet restore` 
+- `dotnet build --configuration Release`
+
 [Homebrew]: http://brew.sh/
 [DiscordApp]: https://discordapp.com/developers/applications/me
 [Atom]: https://atom.io/

docs/guides/Windows Guide.md

@@ -2,7 +2,8 @@ ________________________________________________________________________________
 *Thanks to @Flatbread and Mirai for making this guide*
 ________________________________________________________________________________
 
-### Setting Up NadekoBot on Windows
+## Setting Up NadekoBot on Windows
+
 #### Prerequisites 
 - 1) [.NET Core SDK][.NET Core SDK]
 - 2) [Git][Git]
@@ -11,18 +12,19 @@ ________________________________________________________________________________
 - 5) Soundcloud Account (if you want soundcloud support)
 - 6) [7zip][7zip] (or whatever you are using, WinRar)
 - 7) [Notepad++][Notepad++]
-- 8) Windows 8 or newer
+- 8) Windows 8 or later
 
 ####Guide 
 - Make sure you have installed both [Git][Git] and the [.NET Core SDK][.NET Core SDK].
-- Create a folder somewhere and name it `Nadeko`.
+- Create a **new folder** anywhere you like and name it `Nadeko`.
-- Head to the [Windows Installer releases page][WinInstaller] and save the zip as prompted.
+- Next, [Right-Click on this link](https://github.com/Kwoth/NadekoBotInstallerWin/raw/master/NadekoWinAIO.bat) and select **Save link as** and save the file `NadekoWinAIO.bat` inside the `Nadeko` folder that we created earlier. (**DO NOT** rename the file `NadekoWinAIO.bat`)
-- Extract the contents of the zip you just downloaded to the `Nadeko` folder that we created earlier.
+- Once that's done, double-click on `NadekoWinAIO.bat` to run it.
-- You should see another folder in the `Nadeko` folder, something along the lines of `NadekoBotInstallerWin-master` copy the contents of this folder, to the `Nadeko` folder, then (optionally) remove the empty, `NadekoBotInstallerWin-master` folder
+- From the options, 
-- You should now see three files, most importantly, `NadekoInstaller.bat` after moving the contents of the folder mentioned above to the `Nadeko` folder (You may not see the `.bat` part of the filename).
+	- Choose `1` to get the **most recent build**.
-- Run/Launch/Open `NadekoInstaller.bat` and you will see it running in the command prompt.
+	- Choose `2` to get the **stable build**.
 - Wait a while for the file to finish installing, it'll display it's progress in the command prompt.
 - You should now have a new folder named `NadekoBot` inside the `Nadeko` folder we previously created.
+- Once Installation is completed, press any key to close the command prompt.
 
 ####Creating DiscordBot application
 - Go to [the Discord developer application page][DiscordApp].
@@ -57,14 +59,24 @@ ________________________________________________________________________________
 - The bot should have been added to your server.
 
 ####Starting the bot
-- Go to the folder which you extracted the zip to earlier, and run the `NadekoRun.bat` file
+- Go to the `Nadeko` folder that we have created earlier, and run the `NadekoWinAIO.bat` file.
-- Your bot should now be online in the server we added her to.
+- From the options,
-- Note: Your bot will be offline in case you close the `NadekoBot` command prompt window.
+	- Choose `3` to **run the bot normally**.	
+	(with normal-run the bot will shutdown and will stay offline if it disconnects by the use of `.die` command until you manually run it again. Useful if you want to test the bot.)
+	- Choose `4` to **run the bot with auto restart**.	
+	(with auto restart the bot will restart itself if it disconnects by the use of `.die` command. Useful if you want to have restart function for any reason.)
 
 ####Updating NadekoBot
 - Make sure the bot is closed and is not running (Run `.die` in a connected server to ensure it's not running).
-- Run `NadekoInstaller.bat` again and wait for it to finish.
+- Once that's checked, go to the `Nadeko` folder.
-- Run `NadekoRun.bat`.
+- Run the `NadekoWinAIO.bat` file.
+- From the options, 
+	- Choose `1` to get the **most recent build**.
+	- Choose `2` to get the **stable build**.
+- Follow the messages and press any key to continue.
+- Wait for it to finish. 
+- Press any key to close the window when it shows **Installation complete.** 
+- [Start the bot again.](http://nadekobot.readthedocs.io/en/1.0/guides/Windows%20Guide/#starting-the-bot)
 - You've updated and are running again, easy as that!
 ________________________________________________________________________________
 
@@ -99,7 +111,7 @@ ________________________________________________________________________________
 - Setup your API keys as explained above.
 - Restart your computer.
 
-[.NET Core SDK]: https://go.microsoft.com/fwlink/?LinkID=827524
+[.NET Core SDK]: https://www.microsoft.com/net/core#windowscmd
 [Git]: https://git-scm.com/download/win
 [WinInstaller]: https://github.com/Kwoth/NadekoBotInstallerWin/archive/master.zip
 [FFMPEG]: https://github.com/Soundofdarkness/FFMPEG-Inst/releases

scripts/NadekoAutoRun.bat

@@ -0,0 +1,6 @@
+@ECHO off
+@TITLE NadekoBot
+:auto
+CD /D %~dp0NadekoBot\src\NadekoBot
+dotnet run --configuration Release
+goto auto

scripts/NadekoInstaller.bat

@@ -0,0 +1,110 @@
+@ECHO off
+TITLE Downloading NadekoBot, please wait
+::Setting convenient to read variables which don't delete the windows temp folder
+SET root=%~dp0
+CD /D %root%
+SET rootdir=%cd%
+SET build1=%root%NadekoInstall_Temp\NadekoBot\discord.net\src\Discord.Net\
+SET build2=%root%NadekoInstall_Temp\NadekoBot\discord.net\src\Discord.Net.Commands\
+SET build3=%root%NadekoInstall_Temp\NadekoBot\src\NadekoBot\
+SET installtemp=%root%NadekoInstall_Temp\
+::Deleting traces of last setup for the sake of clean folders, if by some miracle it still exists
+IF EXIST %installtemp% ( RMDIR %installtemp% /S /Q >nul 2>&1)
+::Checks that both git and dotnet are installed
+dotnet --version >nul 2>&1 || GOTO :dotnet
+git --version >nul 2>&1 || GOTO :git
+::Creates the install directory to work in and get the current directory because spaces ruins everything otherwise
+:start
+MKDIR NadekoInstall_Temp
+CD /D %installtemp%
+::Downloads the latest version of Nadeko
+ECHO Downloading Nadeko...
+ECHO.
+git clone -b 1.0 --recursive --depth 1 --progress https://github.com/Kwoth/NadekoBot.git >nul
+IF %ERRORLEVEL% EQU 128 (GOTO :giterror)
+TITLE Installing NadekoBot, please wait
+ECHO.
+ECHO Installing...
+::Building Nadeko
+CD /D %build1%
+dotnet restore >nul 2>&1
+CD /D %build2%
+dotnet restore >nul 2>&1
+CD /D %build3%
+dotnet restore >nul 2>&1
+dotnet build --configuration Release >nul 2>&1
+::Attempts to backup old files if they currently exist in the same folder as the batch file
+IF EXIST "%root%NadekoBot\" (GOTO :backupinstall)
+:freshinstall
+	::Moves the NadekoBot folder to keep things tidy
+	ROBOCOPY "%root%NadekoInstall_Temp" "%rootdir%" /E /MOVE >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	GOTO :end
+:backupinstall
+	TITLE Backing up old files
+	ECHO.
+	ECHO Make sure to close any files such as NadekoBot.db before PRESSing ANY KEY TO CONTINUE to prevent data loss
+	PAUSE >nul 2>&1
+	::Recursively copies all files and folders from NadekoBot to NadekoBot_Old
+	ROBOCOPY "%root%NadekoBot" "%root%NadekoBot_Old" /MIR >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old files backed up to NadekoBot_Old
+	::Copies the credentials and database from the backed up data to the new folder
+	COPY "%root%NadekoBot_Old\src\NadekoBot\credentials.json" "%installtemp%NadekoBot\src\NadekoBot\credentials.json" >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO credentials.json copied to new folder
+	ROBOCOPY "%root%NadekoBot_Old\src\NadekoBot\bin" "%installtemp%NadekoBot\src\NadekoBot\bin" /E >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old bin folder copied to new folder
+	ROBOCOPY "%root%NadekoBot_Old\src\NadekoBot\data" "%installtemp%NadekoBot\src\NadekoBot\data" /E >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old data folder copied to new folder
+	::Moves the setup Nadeko folder
+	RMDIR "%root%NadekoBot\" /S /Q >nul 2>&1
+	ROBOCOPY "%root%NadekoInstall_Temp" "%rootdir%" /E /MOVE >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	GOTO :end
+:dotnet
+	::Terminates the batch script if it can't run dotnet --version
+	TITLE Error!
+	ECHO dotnet not found, make sure it's been installed as per the guides instructions!
+	ECHO Press any key to exit.
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:git
+	::Terminates the batch script if it can't run git --version
+	TITLE Error!
+	ECHO git not found, make sure it's been installed as per the guides instructions!
+	ECHO Press any key to exit.
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:giterror
+	ECHO.
+	ECHO Git clone failed, trying again
+	RMDIR %installtemp% /S /Q >nul 2>&1
+	GOTO :start
+:copyerror
+	::If at any point a copy error is encountered 
+	TITLE Error!
+	ECHO.
+	ECHO An error in copying data has been encountered, returning an exit code of %ERRORLEVEL%
+	ECHO.
+	ECHO Make sure to close any files, such as `NadekoBot.db` before continuing or try running the installer as an Administrator
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:end
+	::Normal execution of end of script
+	TITLE Installation complete!
+	CD /D "%root%"
+	RMDIR /S /Q "%installtemp%" >nul 2>&1
+	ECHO.
+	ECHO Installation complete, press any key to close this window!
+	PAUSE >nul 2>&1
+	del NadekoStable.bat

scripts/NadekoInstallerLatest.bat

@@ -0,0 +1,110 @@
+@ECHO off
+TITLE Downloading NadekoBot, please wait
+::Setting convenient to read variables which don't delete the windows temp folder
+SET root=%~dp0
+CD /D %root%
+SET rootdir=%cd%
+SET build1=%root%NadekoInstall_Temp\NadekoBot\discord.net\src\Discord.Net\
+SET build2=%root%NadekoInstall_Temp\NadekoBot\discord.net\src\Discord.Net.Commands\
+SET build3=%root%NadekoInstall_Temp\NadekoBot\src\NadekoBot\
+SET installtemp=%root%NadekoInstall_Temp\
+::Deleting traces of last setup for the sake of clean folders, if by some miracle it still exists
+IF EXIST %installtemp% ( RMDIR %installtemp% /S /Q >nul 2>&1)
+::Checks that both git and dotnet are installed
+dotnet --version >nul 2>&1 || GOTO :dotnet
+git --version >nul 2>&1 || GOTO :git
+::Creates the install directory to work in and get the current directory because spaces ruins everything otherwise
+:start
+MKDIR NadekoInstall_Temp
+CD /D %installtemp%
+::Downloads the latest version of Nadeko
+ECHO Downloading Nadeko...
+ECHO.
+git clone -b dev --recursive --depth 1 --progress https://github.com/Kwoth/NadekoBot.git >nul
+IF %ERRORLEVEL% EQU 128 (GOTO :giterror)
+TITLE Installing NadekoBot, please wait
+ECHO.
+ECHO Installing...
+::Building Nadeko
+CD /D %build1%
+dotnet restore >nul 2>&1
+CD /D %build2%
+dotnet restore >nul 2>&1
+CD /D %build3%
+dotnet restore >nul 2>&1
+dotnet build --configuration Release >nul 2>&1
+::Attempts to backup old files if they currently exist in the same folder as the batch file
+IF EXIST "%root%NadekoBot\" (GOTO :backupinstall)
+:freshinstall
+	::Moves the NadekoBot folder to keep things tidy
+	ROBOCOPY "%root%NadekoInstall_Temp" "%rootdir%" /E /MOVE >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	GOTO :end
+:backupinstall
+	TITLE Backing up old files
+	ECHO.
+	ECHO Make sure to close any files such as NadekoBot.db before PRESSing ANY KEY TO CONTINUE to prevent data loss
+	PAUSE >nul 2>&1
+	::Recursively copies all files and folders from NadekoBot to NadekoBot_Old
+	ROBOCOPY "%root%NadekoBot" "%root%NadekoBot_Old" /MIR >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old files backed up to NadekoBot_Old
+	::Copies the credentials and database from the backed up data to the new folder
+	COPY "%root%NadekoBot_Old\src\NadekoBot\credentials.json" "%installtemp%NadekoBot\src\NadekoBot\credentials.json" >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO credentials.json copied to new folder
+	ROBOCOPY "%root%NadekoBot_Old\src\NadekoBot\bin" "%installtemp%NadekoBot\src\NadekoBot\bin" /E >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old bin folder copied to new folder
+	ROBOCOPY "%root%NadekoBot_Old\src\NadekoBot\data" "%installtemp%NadekoBot\src\NadekoBot\data" /E >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	ECHO.
+	ECHO Old data folder copied to new folder
+	::Moves the setup Nadeko folder
+	RMDIR "%root%NadekoBot\" /S /Q >nul 2>&1
+	ROBOCOPY "%root%NadekoInstall_Temp" "%rootdir%" /E /MOVE >nul 2>&1
+	IF %ERRORLEVEL% GEQ 8 (GOTO :copyerror)
+	GOTO :end
+:dotnet
+	::Terminates the batch script if it can't run dotnet --version
+	TITLE Error!
+	ECHO dotnet not found, make sure it's been installed as per the guides instructions!
+	ECHO Press any key to exit.
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:git
+	::Terminates the batch script if it can't run git --version
+	TITLE Error!
+	ECHO git not found, make sure it's been installed as per the guides instructions!
+	ECHO Press any key to exit.
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:giterror
+	ECHO.
+	ECHO Git clone failed, trying again
+	RMDIR %installtemp% /S /Q >nul 2>&1
+	GOTO :start
+:copyerror
+	::If at any point a copy error is encountered 
+	TITLE Error!
+	ECHO.
+	ECHO An error in copying data has been encountered, returning an exit code of %ERRORLEVEL%
+	ECHO.
+	ECHO Make sure to close any files, such as `NadekoBot.db` before continuing or try running the installer as an Administrator
+	PAUSE >nul 2>&1
+	CD /D "%root%"
+	GOTO :EOF
+:end
+	::Normal execution of end of script
+	TITLE Installation complete!
+	CD /D "%root%"
+	RMDIR /S /Q "%installtemp%" >nul 2>&1
+	ECHO.
+	ECHO Installation complete, press any key to close this window!
+	PAUSE >nul 2>&1
+	del NadekoLatest.bat

scripts/NadekoRun.bat

@@ -0,0 +1,9 @@
+@ECHO off
+@TITLE NadekoBot
+CD /D %~dp0NadekoBot\src\NadekoBot
+dotnet run --configuration Release
+ECHO NadekoBot has been succesfully stopped, press any key to close this window.
+TITLE NadekoBot - Stopped
+CD /D %~dp0
+PAUSE >nul 2>&1
+del NadekoRunNormal.bat